Bridjit Curb Ramps are EASY to install!

Prospective customers always ask us if our Bridjit curb ramps are easy to install. The answer is “yes!” This brief instructional video (2:45 minutes) will show you just how easy it is to install your new auto ramp set in minutes. You’ll need a minimum of time and tools, and you are ready to go!

Still have questions? Call us TODAY – we want to help!

Made in the USA from recycled tires.

Bridjit Curb Ramps
877-522-6611
www.bridjit.com

What do I need to install Bridjit Curb Ramps?

This is one of our most frequently asked questions. Can I install these driveway curb ramps myself? What do I need to assemble them? That’s simple. You’ll need four items: (1) a hammer, (2) a flat blade screwdriver, (3) a short 2” x 4” board or other 4” high blocking material, and (4) a broom and dustpan.

First, sweep up the debris in the gutter and road near your curb.

Second, lay curb ramp (“bridge”) sections together in the gutter.

Third, flip each section away from the curb so that the bridge is upside down and parallel to the gutter.

Fourth, drive the pre-installed galvanized bolts from the center section to the outer section with a hammer.

Fifth, lifting up each section, insert a 2×4” block under the ramp, pry up on the threaded end of the bolt with a screwdriver, pushing down toward the center line of the ramp, and screw in the provided nuts onto each bolt.

Last, return the curb ramps to their installed position at the base of your rollover curb, in the center of your driveway.

Enjoy the “no jar to your car” solution. For detailed instructions, photos and more FAQs, visit www.bridjit.com.

Made in the USA from recycled tires.

Bridjit Curb Ramps
877-522-6611
www.bridjit.com

Are Bridjit Curb Ramps easy to install?

Yes, curb ramps can be easily installed in a matter of minutes with little more than a hammer and screwdriver. The sections bolt together, rather than to the concrete, so simply align them in your curb’s gutter, bolt together and test drive! Three sections bolted together weigh 130 pounds and four sections total 175 pounds, so they are sturdy and will stay in place. They’re also heavy enough to deter thieves from walking off with them. After installation, the curb ramps can remain in place or be flipped out of the way for cleaning.

Made in the USA from recycled tires.

Bridjit Curb Ramps
www.bridjit.com