A prospective buyer called to ask how many four-foot gutter and curb ramp sections she would need for her driveway. The number of sections required depends on the width and depth of your driveway.
A two-car garage with a driveway less than two cars deep will require an additional center section, so you have room to maneuver your cars to the center of the driveway opening. Additional center sections can be added later but we recommend a minimum of four sections if you have a two-car garage with less than a two-car-deep driveway or a three-car garage. Still not sure? Visit Bridjit.com today for more information or call us at 877-522-6611.
Based on our research with makers of curb extrusion machines, most municipalities and counties adopt individual design standards for curbs in their area. We believe our design is a one-size-fits-all device for roll over style curbs from 4 to 7 inches high. To comply with municipal requirements, we recommend our initial 3-section ramp set, but some customers with a need for wider coverage have purchased additional 4 foot center sections as needed. Because the curb ramp sections bolt to each other and not to the ground, they are easy to install and are municipality/street-sweeper friendly.